Warehouse lighting in Barkby
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Barkby often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Barkby
Loading bays in Barkby need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.
For Barkby sites with roof lights, daylight sensing can hold the high bays at a low level for much of a summer day.
Barkby sits within Leicestershire. We work throughout the LE7, LE4 and LE5 postcode districts and surrounding places, including Humberstone, Leicester and Mountsorrel.
Barkby at a glance
What's included
- Replacement of metal halide and sodium fittings and their control gear
- Presence sensing per aisle so empty aisles dim or switch off
- Lift and scaffold access planned around your operation
- Lux checks after installation against the agreed design
Guide prices in Barkby
Typical budgets for Barkby premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £145 – £295 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,250 – £24,400 excluding VAT. Fixed price after a free survey.
Rules that apply in Barkby
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Barkby FAQs
Do you remove the old fittings in Barkby?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
How quickly can you survey in Barkby?
Most surveys in Barkby can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Who does the work in Barkby?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Barkby
- Warehouse lighting in Humberstone
- Warehouse lighting in Leicester
- Warehouse lighting in Mountsorrel
- Warehouse lighting in Oadby
- Warehouse lighting in Evington
- Warehouse lighting in Braunstone