Warehouse lighting in Tetney
LED high bays and aisle lighting for warehouses and distribution sites. Available across Tetney and Lincolnshire. Loading bays in Tetney need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.
Local warehouse lighting in Tetney
In Tetney distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
We plan lift access in Tetney around your picking routes and loading times, so the warehouse keeps moving while the work is done.
Tetney is a smaller community with its own businesses, covered by postcode districts DN36, DN35 and DN33. We regularly work across Lincolnshire, so access, parking and out-of-hours working are planned before we arrive.
Tetney at a glance
What's included
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Presence sensing per aisle so empty aisles dim or switch off
- Replacement of metal halide and sodium fittings and their control gear
- Lux checks after installation against the agreed design
Guide prices in Tetney
Typical budgets for Tetney premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £145 – £290 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,150 – £24,150 excluding VAT. Fixed price after a free survey.
Rules that apply in Tetney
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Tetney FAQs
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
Do you remove the old fittings in Tetney?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Which rules apply to lighting work in Tetney?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
What does warehouse LED lighting cost?
As a budget, LED high bays cost around £150–£400 per fitting supplied and installed, excluding VAT, plus lift hire at about £150–£300 per day if needed.
Warehouse lighting near Tetney
- Warehouse lighting in Cleethorpes
- Warehouse lighting in Grimsby
- Warehouse lighting in Bradley
- Warehouse lighting in Stallingborough
- Warehouse lighting in Louth
- Warehouse lighting in Immingham