Warehouse lighting in Crosby
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Crosby often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Crosby
Aisle-by-aisle presence sensing works well in Crosby warehouses where some aisles are only visited a few times an hour.
We plan lift access in Crosby around your picking routes and loading times, so the warehouse keeps moving while the work is done.
Crosby is a local centre, covered by postcode districts L23, L22 and L21. We regularly work across Merseyside, so access, parking and out-of-hours working are planned before we arrive.
Crosby at a glance
What's included
- Presence sensing per aisle so empty aisles dim or switch off
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Replacement of metal halide and sodium fittings and their control gear
- Loading bay, dock leveller and yard lighting
Guide prices in Crosby
Typical budgets for Crosby premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £145 – £295 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,250 – £24,400 excluding VAT. Fixed price after a free survey.
Rules that apply in Crosby
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Crosby FAQs
Do you remove the old fittings in Crosby?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Who does the work in Crosby?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Can you work out of hours in Crosby?
Yes. Evening, weekend and phased working is common for Crosby offices, shops and warehouses, so the business keeps running.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Crosby
- Warehouse lighting in Bootle
- Warehouse lighting in Litherland
- Warehouse lighting in Maghull
- Warehouse lighting in Fazakerley
- Warehouse lighting in Kirkdale
- Warehouse lighting in Wallasey