Warehouse lighting in Bridgend
In short: lED high bays and aisle lighting for warehouses and distribution sites. We plan lift access in Bridgend around your picking routes and loading times, so the warehouse keeps moving while the work is done.
Local warehouse lighting in Bridgend
Many Bridgend sites run two or three shifts, so lighting hours are high and LED payback is quick, often inside three years.
In Bridgend distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
Bridgend sits within Mid Glamorgan. We work throughout the CF31, CF35 and CF32 postcode districts and surrounding places, including Coity, Pencoed and Garw Valley.
Bridgend at a glance
What's included
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Lift and scaffold access planned around your operation
- Presence sensing per aisle so empty aisles dim or switch off
- Lux checks after installation against the agreed design
Guide prices in Bridgend
Typical budgets for Bridgend premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £145 – £290 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,150 – £24,150 excluding VAT. Fixed price after a free survey.
Rules that apply in Bridgend
The Welsh Approved Document L Volume 2 (2022) uses 95 luminaire lumens per circuit-watt for general lighting, with alternatives such as LENI. A new Welsh edition takes effect from 4 March 2027 with a higher figure of more than 105.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Bridgend FAQs
Which rules apply to lighting work in Bridgend?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, the Welsh Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Do you cover all of Bridgend?
Yes. We work across Bridgend and the CF31, CF35 and CF32 postcode districts, plus nearby places such as Coity, Pencoed and Garw Valley.
Can you work out of hours in Bridgend?
Yes. Evening, weekend and phased working is common for Bridgend offices, shops and warehouses, so the business keeps running.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Bridgend
- Warehouse lighting in Coity
- Warehouse lighting in Pencoed
- Warehouse lighting in Garw Valley
- Warehouse lighting in Cynffig
- Warehouse lighting in Porthcawl
- Warehouse lighting in Cowbridge