Warehouse lighting in Cymmer
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Cymmer often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Cymmer
Loading bays in Cymmer need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.
Many Cymmer sites run two or three shifts, so lighting hours are high and LED payback is quick, often inside three years.
Our teams travel to Cymmer from across Mid Glamorgan. Typical nearby jobs include Tonypandy, Pontypridd and Ystrad, so we can often combine survey visits.
Cymmer at a glance
What's included
- Replacement of metal halide and sodium fittings and their control gear
- Lift and scaffold access planned around your operation
- Lux checks after installation against the agreed design
- LED high bays or narrow-beam aisle fittings matched to racking heights
Guide prices in Cymmer
Typical budgets for Cymmer premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £145 – £290 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,150 – £24,150 excluding VAT. Fixed price after a free survey.
Rules that apply in Cymmer
The Welsh Approved Document L Volume 2 (2022) uses 95 luminaire lumens per circuit-watt for general lighting, with alternatives such as LENI. A new Welsh edition takes effect from 4 March 2027 with a higher figure of more than 105.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Cymmer FAQs
Do you remove the old fittings in Cymmer?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
How quickly can you survey in Cymmer?
Most surveys in Cymmer can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Do you cover all of Cymmer?
Yes. We work across Cymmer and the CF39, CF40 and CF37 postcode districts, plus nearby places such as Tonypandy, Pontypridd and Ystrad.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Cymmer
- Warehouse lighting in Tonypandy
- Warehouse lighting in Pontypridd
- Warehouse lighting in Ystrad
- Warehouse lighting in Rhondda
- Warehouse lighting in Llantwit Fardre
- Warehouse lighting in Llanharan