Warehouse lighting in Newton on the Moor
What we do in Newton on the Moor: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Newton on the Moor often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Newton on the Moor
For Newton on the Moor sites with roof lights, daylight sensing can hold the high bays at a low level for much of a summer day.
Aisle-by-aisle presence sensing works well in Newton on the Moor warehouses where some aisles are only visited a few times an hour.
We cover the whole of Newton on the Moor, including the NE65 postcode district, and nearby places such as Denwick, Morpeth and Ashington.
Newton on the Moor at a glance
What's included
- Lux checks after installation against the agreed design
- Loading bay, dock leveller and yard lighting
- Presence sensing per aisle so empty aisles dim or switch off
- LED high bays or narrow-beam aisle fittings matched to racking heights
Guide prices in Newton on the Moor
Typical budgets for Newton on the Moor premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £380 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £75 – £190 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £75 | per sensor, installed |
| Scissor or boom lift hire | £145 – £285 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,000 – £23,650 excluding VAT. Fixed price after a free survey.
Rules that apply in Newton on the Moor
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Newton on the Moor FAQs
Do you remove the old fittings in Newton on the Moor?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Can you work out of hours in Newton on the Moor?
Yes. Evening, weekend and phased working is common for Newton on the Moor offices, shops and warehouses, so the business keeps running.
Which rules apply to lighting work in Newton on the Moor?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Do you need to shut the warehouse?
No. We plan lift access around your picking routes and usually work at night, at weekends or across quieter shifts.
Warehouse lighting near Newton on the Moor
- Warehouse lighting in Denwick
- Warehouse lighting in Morpeth
- Warehouse lighting in Ashington
- Warehouse lighting in Bedlington
- Warehouse lighting in Ellingham
- Warehouse lighting in Blyth