Warehouse lighting in Perth and Kinross
Warehouse lighting means high-mounted LED luminaires, usually high bays or linear aisle fittings, that light racking, aisles, loading bays and picking areas. We cover Perth and Kinross, including Perth, Auchterarder and Blackford.
Warehouse lighting work in Perth and Kinross
Aisle-by-aisle presence sensing works well in Perth and Kinross warehouses where some aisles are only visited a few times an hour.
Loading bays in Perth and Kinross need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.
What's included
- Lift and scaffold access planned around your operation
- Loading bay, dock leveller and yard lighting
- Lux checks after installation against the agreed design
- Presence sensing per aisle so empty aisles dim or switch off
Guide prices in Perth and Kinross
Typical budgets for Perth and Kinross, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £150 – £300 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,450 – £24,900 excluding VAT.
Rules that apply in Perth and Kinross
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Warehouse lighting by town in Perth and Kinross
- Warehouse lighting in Perth
- Warehouse lighting in Auchterarder
- Warehouse lighting in Blackford
- Warehouse lighting in Blairgowrie
- Warehouse lighting in Comrie
- Warehouse lighting in Crieff
- Warehouse lighting in Killichonan
- Warehouse lighting in Kinross
- Warehouse lighting in Muthill
- Warehouse lighting in Pitlochry
Warehouse lighting FAQs for Perth and Kinross
What energy rules apply to new lighting in Perth and Kinross?
Section 6 of the Scottish building standards sets the efficiency that new lighting in Perth and Kinross must meet. We check fittings against it at design stage and keep the evidence for building control.
Which fire safety law applies in Perth and Kinross?
The Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 sets the duties of the person responsible for fire safety, including emergency lighting where escape routes need it.
Do you need to shut the warehouse?
No. We plan lift access around your picking routes and usually work at night, at weekends or across quieter shifts.
What does warehouse LED lighting cost?
As a budget, LED high bays cost around £150–£400 per fitting supplied and installed, excluding VAT, plus lift hire at about £150–£300 per day if needed.