Warehouse lighting in Kilmacolm
LED high bays and aisle lighting for warehouses and distribution sites. Available across Kilmacolm and Renfrewshire and Inverclyde. Warehouses around Kilmacolm often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Kilmacolm
Aisle-by-aisle presence sensing works well in Kilmacolm warehouses where some aisles are only visited a few times an hour.
Many Kilmacolm sites run two or three shifts, so lighting hours are high and LED payback is quick, often inside three years.
Kilmacolm is a local centre, covered by postcode districts PA13, PA14 and PA11. We regularly work across Renfrewshire and Inverclyde, so access, parking and out-of-hours working are planned before we arrive.
Kilmacolm at a glance
What's included
- Presence sensing per aisle so empty aisles dim or switch off
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Replacement of metal halide and sodium fittings and their control gear
- Lux checks after installation against the agreed design
Guide prices in Kilmacolm
Typical budgets for Kilmacolm premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £150 – £300 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,450 – £24,900 excluding VAT. Fixed price after a free survey.
Rules that apply in Kilmacolm
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Kilmacolm FAQs
Do you remove the old fittings in Kilmacolm?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Who does the work in Kilmacolm?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
How quickly can you survey in Kilmacolm?
Most surveys in Kilmacolm can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
What does warehouse LED lighting cost?
As a budget, LED high bays cost around £150–£400 per fitting supplied and installed, excluding VAT, plus lift hire at about £150–£300 per day if needed.
Warehouse lighting near Kilmacolm
- Warehouse lighting in Ranfurly
- Warehouse lighting in Port Glasgow
- Warehouse lighting in Dumbarton
- Warehouse lighting in Bishopton
- Warehouse lighting in Alexandria
- Warehouse lighting in Johnstone