Warehouse lighting in Madeley
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Madeley often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Madeley
Aisle-by-aisle presence sensing works well in Madeley warehouses where some aisles are only visited a few times an hour.
We plan lift access in Madeley around your picking routes and loading times, so the warehouse keeps moving while the work is done.
We cover the whole of Madeley, including the TF7, TF8 and TF4 postcode districts, and nearby places such as Broseley, Telford and Shifnal.
Madeley at a glance
What's included
- Presence sensing per aisle so empty aisles dim or switch off
- Replacement of metal halide and sodium fittings and their control gear
- Lux checks after installation against the agreed design
- LED high bays or narrow-beam aisle fittings matched to racking heights
Guide prices in Madeley
Typical budgets for Madeley premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £150 – £300 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,450 – £24,900 excluding VAT. Fixed price after a free survey.
Rules that apply in Madeley
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Madeley FAQs
Do you remove the old fittings in Madeley?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Who does the work in Madeley?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
How quickly can you survey in Madeley?
Most surveys in Madeley can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Madeley
- Warehouse lighting in Broseley
- Warehouse lighting in Telford
- Warehouse lighting in Shifnal
- Warehouse lighting in Ryton
- Warehouse lighting in St Georges and Priorslee
- Warehouse lighting in Wellington