Warehouse lighting in Banwell
LED high bays and aisle lighting for warehouses and distribution sites. Available across Banwell and Somerset. Warehouses around Banwell often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Banwell
In Banwell distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
We plan lift access in Banwell around your picking routes and loading times, so the warehouse keeps moving while the work is done.
We cover the whole of Banwell, including the BS29, BS25 and BS24 postcode districts, and nearby places such as Winscombe, Hutton and Weare.
Banwell at a glance
What's included
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Replacement of metal halide and sodium fittings and their control gear
- Lux checks after installation against the agreed design
- Presence sensing per aisle so empty aisles dim or switch off
Guide prices in Banwell
Typical budgets for Banwell premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £155 – £305 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,650 – £25,400 excluding VAT. Fixed price after a free survey.
Rules that apply in Banwell
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Banwell FAQs
Do you remove the old fittings in Banwell?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Which rules apply to lighting work in Banwell?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Can you work out of hours in Banwell?
Yes. Evening, weekend and phased working is common for Banwell offices, shops and warehouses, so the business keeps running.
What does warehouse LED lighting cost?
As a budget, LED high bays cost around £150–£400 per fitting supplied and installed, excluding VAT, plus lift hire at about £150–£300 per day if needed.
Warehouse lighting near Banwell
- Warehouse lighting in Winscombe
- Warehouse lighting in Hutton
- Warehouse lighting in Weare
- Warehouse lighting in Yatton
- Warehouse lighting in Weston-super-Mare
- Warehouse lighting in Cheddar