Warehouse lighting in Keynsham
In short: lED high bays and aisle lighting for warehouses and distribution sites. We plan lift access in Keynsham around your picking routes and loading times, so the warehouse keeps moving while the work is done.
Local warehouse lighting in Keynsham
Warehouses around Keynsham often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Loading bays in Keynsham need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.
We cover the whole of Keynsham, including the BS31, BS30 and BS14 postcode districts, and nearby places such as Bitton, Kingswood and Mangotsfield.
Keynsham at a glance
What's included
- Replacement of metal halide and sodium fittings and their control gear
- Lift and scaffold access planned around your operation
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Lux checks after installation against the agreed design
Guide prices in Keynsham
Typical budgets for Keynsham premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £155 – £305 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,650 – £25,400 excluding VAT. Fixed price after a free survey.
Rules that apply in Keynsham
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Keynsham FAQs
Which rules apply to lighting work in Keynsham?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Who does the work in Keynsham?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Keynsham
- Warehouse lighting in Bitton
- Warehouse lighting in Kingswood
- Warehouse lighting in Mangotsfield
- Warehouse lighting in Bristol
- Warehouse lighting in Clutton
- Warehouse lighting in Bath