Warehouse lighting in Todwick
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Todwick often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Todwick
Loading bays in Todwick need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.
Aisle-by-aisle presence sensing works well in Todwick warehouses where some aisles are only visited a few times an hour.
For Todwick premises we plan works around opening hours, deliveries and shared access, which matters on mixed-use estates and high streets.
Todwick at a glance
What's included
- Replacement of metal halide and sodium fittings and their control gear
- Lux checks after installation against the agreed design
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Presence sensing per aisle so empty aisles dim or switch off
Guide prices in Todwick
Typical budgets for Todwick premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £145 – £290 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,150 – £24,150 excluding VAT. Fixed price after a free survey.
Rules that apply in Todwick
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Todwick FAQs
Do you remove the old fittings in Todwick?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
How quickly can you survey in Todwick?
Most surveys in Todwick can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Which rules apply to lighting work in Todwick?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Todwick
- Warehouse lighting in Dinnington
- Warehouse lighting in Eckington
- Warehouse lighting in Bramley
- Warehouse lighting in Maltby
- Warehouse lighting in Rotherham
- Warehouse lighting in Staveley