Warehouse lighting in Walton-on-Thames
In short: lED high bays and aisle lighting for warehouses and distribution sites. We plan lift access in Walton-on-Thames around your picking routes and loading times, so the warehouse keeps moving while the work is done.
Local warehouse lighting in Walton-on-Thames
Warehouses around Walton-on-Thames often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
For Walton-on-Thames sites with roof lights, daylight sensing can hold the high bays at a low level for much of a summer day.
Walton-on-Thames is a substantial town, covered by postcode districts KT12, TW17 and TW16. We regularly work across Surrey, so access, parking and out-of-hours working are planned before we arrive.
Walton-on-Thames at a glance
What's included
- Replacement of metal halide and sodium fittings and their control gear
- Loading bay, dock leveller and yard lighting
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Presence sensing per aisle so empty aisles dim or switch off
Guide prices in Walton-on-Thames
Typical budgets for Walton-on-Thames premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £160 – £430 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £85 – £215 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £85 | per sensor, installed |
| Scissor or boom lift hire | £160 – £320 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £10,100 – £26,650 excluding VAT. Fixed price after a free survey.
Rules that apply in Walton-on-Thames
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Walton-on-Thames FAQs
Which rules apply to lighting work in Walton-on-Thames?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Who does the work in Walton-on-Thames?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Do you remove the old fittings in Walton-on-Thames?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Walton-on-Thames
- Warehouse lighting in Sunbury-on-Thames
- Warehouse lighting in West Molesey
- Warehouse lighting in Weybridge
- Warehouse lighting in Esher
- Warehouse lighting in Hampton
- Warehouse lighting in East Molesey