Warehouse lighting in Windlesham
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Windlesham often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Windlesham
In Windlesham distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
For Windlesham sites with roof lights, daylight sensing can hold the high bays at a low level for much of a summer day.
For Windlesham premises we plan works around opening hours, deliveries and shared access, which matters on mixed-use estates and high streets.
Windlesham at a glance
What's included
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Lux checks after installation against the agreed design
- Loading bay, dock leveller and yard lighting
- Presence sensing per aisle so empty aisles dim or switch off
Guide prices in Windlesham
Typical budgets for Windlesham premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £160 – £430 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £85 – £215 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £85 | per sensor, installed |
| Scissor or boom lift hire | £160 – £320 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £10,100 – £26,650 excluding VAT. Fixed price after a free survey.
Rules that apply in Windlesham
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Windlesham FAQs
Do you remove the old fittings in Windlesham?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Which rules apply to lighting work in Windlesham?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Who does the work in Windlesham?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Windlesham
- Warehouse lighting in Bisley
- Warehouse lighting in Camberley
- Warehouse lighting in Ascot
- Warehouse lighting in Sandhurst
- Warehouse lighting in Bracknell
- Warehouse lighting in Crowthorne