Warehouse lighting in Burgess Hill
In short: lED high bays and aisle lighting for warehouses and distribution sites. In Burgess Hill distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
Local warehouse lighting in Burgess Hill
Many Burgess Hill sites run two or three shifts, so lighting hours are high and LED payback is quick, often inside three years.
Warehouses around Burgess Hill often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
For Burgess Hill premises we plan works around opening hours, deliveries and shared access, which matters on mixed-use estates and high streets.
Burgess Hill at a glance
What's included
- Presence sensing per aisle so empty aisles dim or switch off
- Lift and scaffold access planned around your operation
- Loading bay, dock leveller and yard lighting
- LED high bays or narrow-beam aisle fittings matched to racking heights
Guide prices in Burgess Hill
Typical budgets for Burgess Hill premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £160 – £430 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £85 – £215 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £85 | per sensor, installed |
| Scissor or boom lift hire | £160 – £320 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £10,100 – £26,650 excluding VAT. Fixed price after a free survey.
Rules that apply in Burgess Hill
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Burgess Hill FAQs
Do you cover all of Burgess Hill?
Yes. We work across Burgess Hill and the RH15, BN6 and RH16 postcode districts, plus nearby places such as Clayton, Haywards Heath and Cuckfield Rural.
Do you remove the old fittings in Burgess Hill?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
How quickly can you survey in Burgess Hill?
Most surveys in Burgess Hill can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Burgess Hill
- Warehouse lighting in Clayton
- Warehouse lighting in Haywards Heath
- Warehouse lighting in Cuckfield Rural
- Warehouse lighting in Newtimber
- Warehouse lighting in Henfield
- Warehouse lighting in Lewes