COMMERCIALLighting.uk

Warehouse lighting in Tillington

Warehouse lighting in Tillington: fixed-price quotes, out-of-hours installation and proper paperwork. We also cover Midhurst and Wisborough Green.

Warehouse lighting in Tillington

In short: lED high bays and aisle lighting for warehouses and distribution sites. Many Tillington sites run two or three shifts, so lighting hours are high and LED payback is quick, often inside three years.

Large warehouse with rows of LED high bay lights above pallet racking

Local warehouse lighting in Tillington

Loading bays in Tillington need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.

For Tillington sites with roof lights, daylight sensing can hold the high bays at a low level for much of a summer day.

Tillington sits within West Sussex. We work throughout the GU28 postcode district and surrounding places, including Midhurst, Wisborough Green and Haslemere.

Tillington at a glance

AreaWest Sussex
Postcode districtsGU28
NearbyMidhurst, Wisborough Green and Haslemere
RulesThe Fire Safety Order; Approved Document L

What's included

  • LED high bays or narrow-beam aisle fittings matched to racking heights
  • Presence sensing per aisle so empty aisles dim or switch off
  • Replacement of metal halide and sodium fittings and their control gear
  • Loading bay, dock leveller and yard lighting

Guide prices in Tillington

Typical budgets for Tillington premises, supplied and installed, excluding VAT.

Guide prices in Tillington
ItemGuide budget (ex VAT)Basis
LED high bay£160 – £430per fitting, supplied and fitted
LED batten (complete luminaire)£85 – £215per fitting, supplied and fitted
Presence (PIR) sensor£45 – £85per sensor, installed
Scissor or boom lift hire£160 – £320per day

Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £10,100 – £26,650 excluding VAT. Fixed price after a free survey.

Rules that apply in Tillington

Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.

In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.

Tillington FAQs

How quickly can you survey in Tillington?

Most surveys in Tillington can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.

Which rules apply to lighting work in Tillington?

Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.

Do you remove the old fittings in Tillington?

Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.

How much can LED high bays save?

Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.

Warehouse lighting near Tillington

Other lighting services in Tillington

Get a fixed-price lighting quote

Free survey, clear scope, certified work. Prices exclude VAT.