Warehouse lighting in Heckmondwike
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Heckmondwike often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Heckmondwike
In Heckmondwike distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
Loading bays in Heckmondwike need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.
Heckmondwike is a town with plenty of offices, shops and units, covered by postcode districts WF16, WF15 and WF13. We regularly work across West Yorkshire, so access, parking and out-of-hours working are planned before we arrive.
Heckmondwike at a glance
What's included
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Lift and scaffold access planned around your operation
- Loading bay, dock leveller and yard lighting
- Presence sensing per aisle so empty aisles dim or switch off
Guide prices in Heckmondwike
Typical budgets for Heckmondwike premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £145 – £290 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,150 – £24,150 excluding VAT. Fixed price after a free survey.
Rules that apply in Heckmondwike
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Heckmondwike FAQs
Do you remove the old fittings in Heckmondwike?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Which rules apply to lighting work in Heckmondwike?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Heckmondwike
- Warehouse lighting in Liversedge
- Warehouse lighting in Batley
- Warehouse lighting in Cleckheaton
- Warehouse lighting in Dewsbury
- Warehouse lighting in Mirfield
- Warehouse lighting in Morley