Fit-out and new-build lighting in Argyll and Bute
Fit-out lighting is the installation of new lighting, controls and emergency lighting during a commercial fit-out, refurbishment or new-build, from first-fix containment and cabling to second-fix luminaires and commissioning. We cover Argyll and Bute, including Ardrishaig, Ballygrant and Bowmore.
Fit-out and new-build lighting work in Argyll and Bute
We coordinate with ceiling and partition trades on Argyll and Bute fit-outs so first fix is done before ceilings close.
Fit-outs in Argyll and Bute need lighting that meets current energy rules on the day building control signs off, so we check efficacy at design stage.
We cover Argyll and Bute by arrangement. Because of travel and access, visits are usually grouped with other work in Argyll and Bute, so please allow more time for a survey and tell us about any ferry or access constraints.
What's included
- Controls designed in, not bolted on
- Coordination with ceiling, partition and M&E trades
- Certificates, as-fitted schedules and O&M information
- Emergency lighting designed to BS 5266-1
Guide prices in Argyll and Bute
Typical budgets for Argyll and Bute, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| Emergency luminaire or exit sign | £60 – £150 | per fitting, supplied and fitted |
| DALI dimming and control | £50 – £150 | per luminaire, on top of the fitting |
Example: 80 LED fittings and 20 emergency fittings in a new office fit-out, about £5,200 – £15,000 excluding VAT.
Rules that apply in Argyll and Bute
Emergency lighting in Argyll and Bute falls under the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. The responsible person must make sure people can see their way out if the power fails, and keep records of testing.
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
Towns we cover in Argyll and Bute
- Ardrishaig
- Ballygrant
- Bowmore
- Bridge of Orchy
- Bunessan
- Cairndow
- Campbeltown
- Crossapol
- Dunoon
- Helensburgh
- Lochdon
- Lochgilphead
- Lochgoilhead
- Oban
- Port Askaig
- Port Charlotte
- Port Ellen
- Portnahaven
- Rothesay
- Scalasaig
- Strachur
- Tighnabruaich
Fit-out and new-build lighting FAQs for Argyll and Bute
Which towns in Argyll and Bute do you cover?
All of Argyll and Bute, including Ardrishaig, Ballygrant and Bowmore. See the towns list on this page for local pages.
Which fire safety law applies in Argyll and Bute?
The Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 sets the duties of the person responsible for fire safety, including emergency lighting where escape routes need it.
Do you work as a subcontractor?
Yes. We can work for a main contractor or directly for the occupier.