Fit-out and new-build lighting in Renfrewshire and Inverclyde
Fit-out lighting is the installation of new lighting, controls and emergency lighting during a commercial fit-out, refurbishment or new-build, from first-fix containment and cabling to second-fix luminaires and commissioning. We cover Renfrewshire and Inverclyde, including Paisley, Greenock and Renfrew.
Fit-out and new-build lighting work in Renfrewshire and Inverclyde
Fit-outs in Renfrewshire and Inverclyde need lighting that meets current energy rules on the day building control signs off, so we check efficacy at design stage.
We coordinate with ceiling and partition trades on Renfrewshire and Inverclyde fit-outs so first fix is done before ceilings close.
What's included
- Certificates, as-fitted schedules and O&M information
- Emergency lighting designed to BS 5266-1
- First-fix containment and cabling, second-fix luminaires
- Part L (or national equivalent) efficacy evidence for building control
Guide prices in Renfrewshire and Inverclyde
Typical budgets for Renfrewshire and Inverclyde, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| Emergency luminaire or exit sign | £60 – £150 | per fitting, supplied and fitted |
| DALI dimming and control | £50 – £150 | per luminaire, on top of the fitting |
Example: 80 LED fittings and 20 emergency fittings in a new office fit-out, about £5,200 – £15,000 excluding VAT.
Rules that apply in Renfrewshire and Inverclyde
Emergency lighting in Renfrewshire and Inverclyde falls under the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. The responsible person must make sure people can see their way out if the power fails, and keep records of testing.
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
Towns we cover in Renfrewshire and Inverclyde
- Paisley
- Greenock
- Renfrew
- Johnstone
- Erskine
- Bishopton
- Gourock
- Howwood
- Kilmacolm
- Linwood
- Lochwinnoch
- Port Glasgow
- Ranfurly
- Wemyss Bay
Fit-out and new-build lighting FAQs for Renfrewshire and Inverclyde
What energy rules apply to new lighting in Renfrewshire and Inverclyde?
Section 6 of the Scottish building standards sets the efficiency that new lighting in Renfrewshire and Inverclyde must meet. We check fittings against it at design stage and keep the evidence for building control.
Which fire safety law applies in Renfrewshire and Inverclyde?
The Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 sets the duties of the person responsible for fire safety, including emergency lighting where escape routes need it.
Do you work as a subcontractor?
Yes. We can work for a main contractor or directly for the occupier.