LED lighting upgrades in Mold
In short: swap fluorescent, halogen and metal halide fittings for efficient LED. We quote Mold LED upgrades as a fixed price with a fitting schedule, so you can see exactly what is being replaced, where, and what it should save.
Local LED lighting upgrades in Mold
Most Mold businesses we survey still have a mix of T8 battens, 600×600 fluorescent panels and the odd halogen downlight. Replacing them with complete LED luminaires usually cuts lighting energy by a third to a half.
An LED upgrade in Mold is also the cheapest moment to add presence or daylight sensors, because the electrician is already working on every fitting.
For Mold premises we plan works around opening hours, deliveries and shared access, which matters on mixed-use estates and high streets.
Mold at a glance
What's included
- Optional presence and daylight sensors to cut running hours further
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- A walk-round survey counting fittings, wattages, running hours and ceiling types
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
Guide prices in Mold
Typical budgets for Mold premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £145 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £1,950 – £5,800 excluding VAT. Fixed price after a free survey.
Rules that apply in Mold
The Welsh Approved Document L Volume 2 (2022) uses 95 luminaire lumens per circuit-watt for general lighting, with alternatives such as LENI. A new Welsh edition takes effect from 4 March 2027 with a higher figure of more than 105.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in Wales generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Mold FAQs
Who does the work in Mold?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Can you work out of hours in Mold?
Yes. Evening, weekend and phased working is common for Mold offices, shops and warehouses, so the business keeps running.
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
Can the upgrade be claimed against tax?
Many businesses can claim capital allowances on lighting, for example through the Annual Investment Allowance. Lighting in a building is usually treated as an integral feature, so ask your accountant how it applies to you.
LED lighting upgrades near Mold
- LED lighting upgrades in Buckley
- LED lighting upgrades in Deeside
- LED lighting upgrades in Hawarden
- LED lighting upgrades in Flint
- LED lighting upgrades in Brymbo
- LED lighting upgrades in Saltney