Warehouse lighting in Mold
LED high bays and aisle lighting for warehouses and distribution sites. Many Mold sites run two or three shifts, so lighting hours are high and LED payback is quick, often inside three years.
Local warehouse lighting in Mold
For Mold sites with roof lights, daylight sensing can hold the high bays at a low level for much of a summer day.
We plan lift access in Mold around your picking routes and loading times, so the warehouse keeps moving while the work is done.
Our teams travel to Mold from across Clwyd. Typical nearby jobs include Buckley, Deeside and Hawarden, so we can often combine survey visits.
Mold at a glance
What's included
- Lift and scaffold access planned around your operation
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Replacement of metal halide and sodium fittings and their control gear
- Presence sensing per aisle so empty aisles dim or switch off
Guide prices in Mold
Typical budgets for Mold premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £145 – £290 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,150 – £24,150 excluding VAT. Fixed price after a free survey.
Rules that apply in Mold
The Welsh Approved Document L Volume 2 (2022) uses 95 luminaire lumens per circuit-watt for general lighting, with alternatives such as LENI. A new Welsh edition takes effect from 4 March 2027 with a higher figure of more than 105.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Mold FAQs
How quickly can you survey in Mold?
Most surveys in Mold can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
Who does the work in Mold?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
What lux level does a warehouse need?
It depends on the task. BS EN 12464-1:2021 examples include 100 lux for stores and stockrooms, 150 lux at the floor of rack storage, 200 lux for open storage and loading, and 300 lux for packing and grouping.
Warehouse lighting near Mold
- Warehouse lighting in Buckley
- Warehouse lighting in Deeside
- Warehouse lighting in Hawarden
- Warehouse lighting in Flint
- Warehouse lighting in Brymbo
- Warehouse lighting in Saltney