LED lighting upgrades in Falkirk, Stirling and Clackmannanshire
A commercial LED lighting upgrade replaces old fluorescent, halogen, metal halide or sodium fittings with complete LED luminaires, usually on the existing circuits. We cover Falkirk, Stirling and Clackmannanshire, including Stirling, Falkirk and Alloa.

LED lighting upgrades work in Falkirk, Stirling and Clackmannanshire
We quote Falkirk, Stirling and Clackmannanshire LED upgrades as a fixed price with a fitting schedule, so you can see exactly what is being replaced, where, and what it should save.
Where ceilings in Falkirk, Stirling and Clackmannanshire offices are being replaced anyway, we plan the new LED layout to BS EN 12464-1 rather than simply copying the old positions.
What's included
- A walk-round survey counting fittings, wattages, running hours and ceiling types
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Optional presence and daylight sensors to cut running hours further
Guide prices in Falkirk, Stirling and Clackmannanshire
Typical budgets for Falkirk, Stirling and Clackmannanshire, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,000 – £6,000 excluding VAT.
Rules that apply in Falkirk, Stirling and Clackmannanshire
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Scotland does not use the England and Wales EPC E letting rule. Instead, some non-domestic buildings over 1,000 m² need an action plan when sold or let, under Section 63 regulations.
LED lighting upgrades by town in Falkirk, Stirling and Clackmannanshire
- LED lighting upgrades in Stirling
- LED lighting upgrades in Falkirk
- LED lighting upgrades in Alloa
- LED lighting upgrades in Grangemouth
- LED lighting upgrades in Alva
- LED lighting upgrades in Bo'ness
- LED lighting upgrades in Bridge of Allan
- LED lighting upgrades in Callander
- LED lighting upgrades in Denny
- LED lighting upgrades in Dennyloanhead
- LED lighting upgrades in Doune
- LED lighting upgrades in Dunblane
- LED lighting upgrades in Killearn
- LED lighting upgrades in Killin
- LED lighting upgrades in Larbert
- LED lighting upgrades in Menstrie
- LED lighting upgrades in Polmont
- LED lighting upgrades in Stenhousemuir
- LED lighting upgrades in Strathyre
- LED lighting upgrades in Tillicoultry
LED lighting upgrades FAQs for Falkirk, Stirling and Clackmannanshire
Which fire safety law applies in Falkirk, Stirling and Clackmannanshire?
The Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 sets the duties of the person responsible for fire safety, including emergency lighting where escape routes need it.
How are prices set in Falkirk, Stirling and Clackmannanshire?
Our guide prices are adjusted for regional labour costs. After a survey you get a fixed price for the agreed scope.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
Is it worth replacing fluorescent tubes with LED?
Usually, yes. Common T8 fluorescent tubes were caught by GB ecodesign rules from September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended in February 2024, so replacements are getting harder to source. LED fittings typically use 30–60% less energy for the same light.