LED lighting upgrades in Glasgow and Dunbartonshire
A commercial LED lighting upgrade replaces old fluorescent, halogen, metal halide or sodium fittings with complete LED luminaires, usually on the existing circuits. We cover Glasgow and Dunbartonshire, including Glasgow, Bearsden and Newton Mearns.
LED lighting upgrades work in Glasgow and Dunbartonshire
In Glasgow and Dunbartonshire warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
An LED upgrade in Glasgow and Dunbartonshire is also the cheapest moment to add presence or daylight sensors, because the electrician is already working on every fitting.
What's included
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Optional presence and daylight sensors to cut running hours further
Guide prices in Glasgow and Dunbartonshire
Typical budgets for Glasgow and Dunbartonshire, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,000 – £6,000 excluding VAT.
Rules that apply in Glasgow and Dunbartonshire
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Scotland does not use the England and Wales EPC E letting rule. Instead, some non-domestic buildings over 1,000 m² need an action plan when sold or let, under Section 63 regulations.
LED lighting upgrades by town in Glasgow and Dunbartonshire
- LED lighting upgrades in Glasgow
- LED lighting upgrades in Bearsden
- LED lighting upgrades in Newton Mearns
- LED lighting upgrades in Clydebank
- LED lighting upgrades in Alexandria
- LED lighting upgrades in Bishopbriggs
- LED lighting upgrades in Dumbarton
- LED lighting upgrades in Kirkintilloch
- LED lighting upgrades in Barrhead
- LED lighting upgrades in Clarkston
- LED lighting upgrades in Giffnock
- LED lighting upgrades in Milngavie
LED lighting upgrades FAQs for Glasgow and Dunbartonshire
Which towns in Glasgow and Dunbartonshire do you cover?
All of Glasgow and Dunbartonshire, including Glasgow, Bearsden and Newton Mearns. See the towns list on this page for local pages.
Which fire safety law applies in Glasgow and Dunbartonshire?
The Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 sets the duties of the person responsible for fire safety, including emergency lighting where escape routes need it.
What does an LED upgrade cost?
As a budget, LED panels run at about £50–£150 per fitting supplied and installed, battens £80–£200 and high bays £150–£400, excluding VAT. Access equipment, rewiring and controls are extra.
Is it worth replacing fluorescent tubes with LED?
Usually, yes. Common T8 fluorescent tubes were caught by GB ecodesign rules from September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended in February 2024, so replacements are getting harder to source. LED fittings typically use 30–60% less energy for the same light.