LED lighting upgrades in Aust
What we do in Aust: swap fluorescent, halogen and metal halide fittings for efficient LED. Spare fluorescent tubes are getting harder to buy since the 2023–24 phase-out, which is why many sites in Aust now upgrade a floor or a unit at a time rather than waiting for failures.
Local LED lighting upgrades in Aust
For an LED upgrade in Aust we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.
In Aust warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
We cover the whole of Aust, including the BS35 and BS32 postcode districts, and nearby places such as Bradley Stoke, Frampton Cotterell and Yate.
Aust at a glance
What's included
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Optional presence and daylight sensors to cut running hours further
Guide prices in Aust
Typical budgets for Aust premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £155 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,050 – £6,100 excluding VAT. Fixed price after a free survey.
Rules that apply in Aust
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Aust FAQs
How quickly can you survey in Aust?
Most surveys in Aust can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Can you work out of hours in Aust?
Yes. Evening, weekend and phased working is common for Aust offices, shops and warehouses, so the business keeps running.
Do you remove the old fittings in Aust?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
LED lighting upgrades near Aust
- LED lighting upgrades in Bradley Stoke
- LED lighting upgrades in Frampton Cotterell
- LED lighting upgrades in Yate
- LED lighting upgrades in St Arvans
- LED lighting upgrades in Berkeley
- LED lighting upgrades in Mangotsfield