LED lighting upgrades in Sittingbourne
In short: swap fluorescent, halogen and metal halide fittings for efficient LED. For an LED upgrade in Sittingbourne we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.
Local LED lighting upgrades in Sittingbourne
An LED upgrade in Sittingbourne is also the cheapest moment to add presence or daylight sensors, because the electrician is already working on every fitting.
In Sittingbourne warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
Our teams travel to Sittingbourne from across Kent. Typical nearby jobs include Queenborough, Faversham and Gillingham, so we can often combine survey visits.
Sittingbourne at a glance
What's included
- Optional presence and daylight sensors to cut running hours further
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- A walk-round survey counting fittings, wattages, running hours and ceiling types
Guide prices in Sittingbourne
Typical budgets for Sittingbourne premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £55 – £160 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £85 – £215 | per fitting, supplied and fitted |
| LED high bay | £160 – £430 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £85 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,150 – £6,400 excluding VAT. Fixed price after a free survey.
Rules that apply in Sittingbourne
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Sittingbourne FAQs
Which rules apply to lighting work in Sittingbourne?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Who does the work in Sittingbourne?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Do you remove the old fittings in Sittingbourne?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
What does an LED upgrade cost?
As a budget, LED panels run at about £50–£150 per fitting supplied and installed, battens £80–£200 and high bays £150–£400, excluding VAT. Access equipment, rewiring and controls are extra.
LED lighting upgrades near Sittingbourne
- LED lighting upgrades in Queenborough
- LED lighting upgrades in Faversham
- LED lighting upgrades in Gillingham
- LED lighting upgrades in Leeds
- LED lighting upgrades in Chatham
- LED lighting upgrades in Hoo St Werburgh