Warehouse lighting in St Breock
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around St Breock often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in St Breock
In St Breock distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
We plan lift access in St Breock around your picking routes and loading times, so the warehouse keeps moving while the work is done.
Our teams travel to St Breock from across Cornwall. Typical nearby jobs include Padstow, St Endellion and Helland, so we can often combine survey visits.
St Breock at a glance
What's included
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Presence sensing per aisle so empty aisles dim or switch off
- Lux checks after installation against the agreed design
- Replacement of metal halide and sodium fittings and their control gear
Guide prices in St Breock
Typical budgets for St Breock premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £155 – £305 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,650 – £25,400 excluding VAT. Fixed price after a free survey.
Rules that apply in St Breock
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
St Breock FAQs
Do you remove the old fittings in St Breock?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Which rules apply to lighting work in St Breock?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Can you work out of hours in St Breock?
Yes. Evening, weekend and phased working is common for St Breock offices, shops and warehouses, so the business keeps running.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near St Breock
- Warehouse lighting in Padstow
- Warehouse lighting in St Endellion
- Warehouse lighting in Helland
- Warehouse lighting in Bodmin
- Warehouse lighting in St Columb Major
- Warehouse lighting in St Teath