Warehouse lighting in St Teath
In short: lED high bays and aisle lighting for warehouses and distribution sites. Aisle-by-aisle presence sensing works well in St Teath warehouses where some aisles are only visited a few times an hour.
Local warehouse lighting in St Teath
In St Teath distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
We plan lift access in St Teath around your picking routes and loading times, so the warehouse keeps moving while the work is done.
St Teath sits within Cornwall. We work throughout the PL33, PL34 and PL32 postcode districts and surrounding places, including Tintagel, Camelford and Forrabury and Minster.
St Teath at a glance
What's included
- Replacement of metal halide and sodium fittings and their control gear
- Loading bay, dock leveller and yard lighting
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Lift and scaffold access planned around your operation
Guide prices in St Teath
Typical budgets for St Teath premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £155 – £305 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,650 – £25,400 excluding VAT. Fixed price after a free survey.
Rules that apply in St Teath
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
St Teath FAQs
Can you work out of hours in St Teath?
Yes. Evening, weekend and phased working is common for St Teath offices, shops and warehouses, so the business keeps running.
Do you remove the old fittings in St Teath?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Which rules apply to lighting work in St Teath?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near St Teath
- Warehouse lighting in Tintagel
- Warehouse lighting in Camelford
- Warehouse lighting in Forrabury and Minster
- Warehouse lighting in St Endellion
- Warehouse lighting in Helland
- Warehouse lighting in St Breock