Warehouse lighting in Blackpool
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Blackpool often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Blackpool
Loading bays in Blackpool need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.
For Blackpool sites with roof lights, daylight sensing can hold the high bays at a low level for much of a summer day.
Blackpool sits within Lancashire. We work throughout the FY1, FY3 and FY4 postcode districts and surrounding places, including Poulton-le-Fylde, Thornton-Cleveleys and Lytham St Annes.
Blackpool at a glance
What's included
- Replacement of metal halide and sodium fittings and their control gear
- Presence sensing per aisle so empty aisles dim or switch off
- Lux checks after installation against the agreed design
- LED high bays or narrow-beam aisle fittings matched to racking heights
Guide prices in Blackpool
Typical budgets for Blackpool premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £145 – £295 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,250 – £24,400 excluding VAT. Fixed price after a free survey.
Rules that apply in Blackpool
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Blackpool FAQs
Do you remove the old fittings in Blackpool?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
How quickly can you survey in Blackpool?
Most surveys in Blackpool can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Blackpool
- Warehouse lighting in Poulton-le-Fylde
- Warehouse lighting in Thornton-Cleveleys
- Warehouse lighting in Lytham St Annes
- Warehouse lighting in Fylde
- Warehouse lighting in Fleetwood
- Warehouse lighting in Freckleton