Warehouse lighting in Poulton-le-Fylde
What we do in Poulton-le-Fylde: lED high bays and aisle lighting for warehouses and distribution sites. In Poulton-le-Fylde distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
Local warehouse lighting in Poulton-le-Fylde
Loading bays in Poulton-le-Fylde need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.
For Poulton-le-Fylde sites with roof lights, daylight sensing can hold the high bays at a low level for much of a summer day.
Poulton-le-Fylde is a working town with a good mix of businesses, covered by postcode districts FY3, FY2 and FY6. We regularly work across Lancashire, so access, parking and out-of-hours working are planned before we arrive.
Poulton-le-Fylde at a glance
What's included
- Lux checks after installation against the agreed design
- Presence sensing per aisle so empty aisles dim or switch off
- Replacement of metal halide and sodium fittings and their control gear
- Loading bay, dock leveller and yard lighting
Guide prices in Poulton-le-Fylde
Typical budgets for Poulton-le-Fylde premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £145 – £295 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,250 – £24,400 excluding VAT. Fixed price after a free survey.
Rules that apply in Poulton-le-Fylde
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Poulton-le-Fylde FAQs
Do you cover all of Poulton-le-Fylde?
Yes. We work across Poulton-le-Fylde and the FY3, FY2 and FY6 postcode districts, plus nearby places such as Fylde, Blackpool and Thornton-Cleveleys.
Which rules apply to lighting work in Poulton-le-Fylde?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Do you remove the old fittings in Poulton-le-Fylde?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Do you need to shut the warehouse?
No. We plan lift access around your picking routes and usually work at night, at weekends or across quieter shifts.
Warehouse lighting near Poulton-le-Fylde
- Warehouse lighting in Fylde
- Warehouse lighting in Blackpool
- Warehouse lighting in Thornton-Cleveleys
- Warehouse lighting in Lytham St Annes
- Warehouse lighting in Fleetwood
- Warehouse lighting in Freckleton