Warehouse lighting in Pentwyn
In short: lED high bays and aisle lighting for warehouses and distribution sites. In Pentwyn distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.

Local warehouse lighting in Pentwyn
Many Pentwyn sites run two or three shifts, so lighting hours are high and LED payback is quick, often inside three years.
Warehouses around Pentwyn often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Our teams travel to Pentwyn from across South Glamorgan. Typical nearby jobs include Trowbridge, Rhiwbina and Cardiff, so we can often combine survey visits.
Pentwyn at a glance
What's included
- Presence sensing per aisle so empty aisles dim or switch off
- Replacement of metal halide and sodium fittings and their control gear
- Lift and scaffold access planned around your operation
- Lux checks after installation against the agreed design
Guide prices in Pentwyn
Typical budgets for Pentwyn premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £145 – £290 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,150 – £24,150 excluding VAT. Fixed price after a free survey.
Rules that apply in Pentwyn
The Welsh Approved Document L Volume 2 (2022) uses 95 luminaire lumens per circuit-watt for general lighting, with alternatives such as LENI. A new Welsh edition takes effect from 4 March 2027 with a higher figure of more than 105.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Pentwyn FAQs
Do you cover all of Pentwyn?
Yes. We work across Pentwyn and the CF23, CF3 and CF24 postcode districts, plus nearby places such as Trowbridge, Rhiwbina and Cardiff.
Do you remove the old fittings in Pentwyn?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Who does the work in Pentwyn?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Pentwyn
- Warehouse lighting in Trowbridge
- Warehouse lighting in Rhiwbina
- Warehouse lighting in Cardiff
- Warehouse lighting in Ely
- Warehouse lighting in Caerphilly
- Warehouse lighting in Penarth