Fit-out and new-build lighting in Gwynedd
Fit-out lighting is the installation of new lighting, controls and emergency lighting during a commercial fit-out, refurbishment or new-build, from first-fix containment and cabling to second-fix luminaires and commissioning. We cover Gwynedd, including Bangor, Aberdovey and Aberffraw.
Fit-out and new-build lighting work in Gwynedd
We coordinate with ceiling and partition trades on Gwynedd fit-outs so first fix is done before ceilings close.
Fit-outs in Gwynedd need lighting that meets current energy rules on the day building control signs off, so we check efficacy at design stage.
What's included
- First-fix containment and cabling, second-fix luminaires
- Controls designed in, not bolted on
- Coordination with ceiling, partition and M&E trades
- Certificates, as-fitted schedules and O&M information
Guide prices in Gwynedd
Typical budgets for Gwynedd, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £145 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Emergency luminaire or exit sign | £60 – £145 | per fitting, supplied and fitted |
| DALI dimming and control | £50 – £145 | per luminaire, on top of the fitting |
Example: 80 LED fittings and 20 emergency fittings in a new office fit-out, about £5,050 – £14,550 excluding VAT.
Rules that apply in Gwynedd
Fire safety duties for premises in Gwynedd come from the Regulatory Reform (Fire Safety) Order 2005. Whoever is responsible for fire safety must make sure escape routes are lit if the normal supply fails, and that the system is tested and maintained.
The Welsh Approved Document L Volume 2 (2022) uses 95 luminaire lumens per circuit-watt for general lighting, with alternatives such as LENI. A new Welsh edition takes effect from 4 March 2027 with a higher figure of more than 105.
Towns we cover in Gwynedd
- Bangor
- Aberdovey
- Aberffraw
- Amlwch
- Arthog
- Bala
- Barmouth
- Beaumaris
- Bodorgan
- Brithdir
- Bryncrug
- Buan
- Criccieth
- Dolbenmaen
- Dyffryn Ardudwy
- Ffestiniog
- Harlech
- Llanbadrig
- Llanbedr
- Llandygai
- Llaneugrad
- Llanfair-Mathafarn-Eithaf
- Llanfihangel Ysgeifiog
- Llangefni
- Llangelynin
- Llanllyfni
- Llannerch-Y-Medd
- Llanrug
- Moelfre
- Penrhyndeudraeth
- Pentraeth
- Penysarn
- Porthmadog
- Rhosneigr
- Rhosybol
- Talsarnau
- Valley
- Y Felinheli
Fit-out and new-build lighting FAQs for Gwynedd
Which towns in Gwynedd do you cover?
All of Gwynedd, including Bangor, Aberdovey and Aberffraw. See the towns list on this page for local pages.
What energy rules apply to new lighting in Gwynedd?
The Welsh Approved Document L sets the efficiency that new lighting in Gwynedd must meet. We check fittings against it at design stage and keep the evidence for building control.
Do you work as a subcontractor?
Yes. We can work for a main contractor or directly for the occupier.